Mason Cycle Werks – Service Pricing Labor Rate -$75.00 / Hour.

  • Prices subject to change depending on condition of bicycle. Service is contingent on the expectation that a safe-riding bicycle will leave the shop. MCW strictly uses Motorex Bike Grease 2000 for the majority of grease-based applications—it’s the best in the business!

Drive-Train Clean – $65.00

  • Remove and degrease crankset, chain, cogset (freewheel), rear and front derailleurs along with all removable parts of the derailleurs (e.g., pulley wheels, B-pivot bolt, etc.)
  • Re-install components with new grease on threads and tighten to spec.

Safety Check (Basic Tune-Up) – $85.00

  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Quick wipedown with bike cleaner of frame and wheels
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release -Brakesets and cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – Wax lube all bolt heads, test ride bicycle

Tune-Up – $125.00

  • Includes installation charge on all parts purchased from MCW excluding: tires, handlebar tape, rigid and suspension fork, bottom bracket, headset, and cartridge bearings in hubs and/or frameset)
  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables) 2
  • Extensive cleaning of bicycle frame, wheels, and components followed by wax/polishing of frame
  • Installation of new components (including cable and housing sets)
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release, wheel/crank/headset bearings -Brakesets and cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Complementary Installation of ORANGE SEAL tire sealant
  • Final Inspection – Wax lube all bolt heads, test ride bicycle

Ultimate Tune-Up – $200.00

  • Includes installation charge on all parts
  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Extensive cleaning of bicycle frame, wheels, and components followed by polishing of frame
  • Removal/cleanings/repacking/reinstallation of wheel/crank/headset bearings (if cartridge bearings are utilized, either installation of new bearing or repacking of old bearing will occur)
  • Complete Drivetrain Clean – Remove and degrease crankset, chain, cogset (freewheel), rear and front derailleur. – Re-installation of components with new grease on threads and tighten to spec
  • Installation of new components (including cable and housing sets)
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release -Brakesets and cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – Wax lube all bolt heads, test ride bicycle
  • Includes installation of all parts

Overhaul $325.00

  • Includes installation of all parts
  • Removal/greasing/reinstallation of all parts from bicycle (including all bolts from threads)
  • Disassembly/cleaning/reassembly derailleurs and brake bodies
  • Extensive cleaning of bicycle frame, wheels, and components followed by polishing of frame
  • Removal/cleanings/repacking/reinstallation of wheel/crank/headset bearings (if cartridge bearings are utilized, either installation of new bearing or repacking of old bearing will occur)
  • Complete Drivetrain Clean – Remove and degrease crankset, chain, cogset (freewheel), rear and front derailleur. – Re-installation of components with new grease on threads and tighten to spec 4
  • Reinstallation of all parts including new components (including cable and housing sets)
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – Wax lube all bolt heads, test ride bicycle

The Full-Suspension “Werks” $350.00

  • Removal of all suspension pivot bolts, degreasing of pivot bearings and/or installation of new bearings
  • Fork and Shock Service (only includes labor charge, excludes replacement parts/fluids)
  • Lube and/or grease all moving parts and pivots (including brake and derailleur cables)
  • Overhaul of bicycle frame, wheels, and components followed by polishing of frame
  • Removal/cleanings/repacking/reinstallation of wheel/crank/headset bearings (if cartridge bearings are utilized, either installation of new bearing or repacking of old bearing will occur)
  • Complete Drivetrain Clean – Remove and degrease crankset, chain, cogset (freewheel), rear and front derailleur. – Re-installation of components with new grease on threads and tighten to spec
  • Installation of components (including cable and housing sets)
  • Adjustment and/or check tension of: -Bolts, Pedals, Wheel Quick Release, -Brakesets and cables -Derailleurs and cables
  • True Front and Rear Wheel, Air Tires
  • Final Inspection – Wax lube all bolt heads, test ride bicycle

Tube/Tire Install

  • On the bike $8.00 per wheel
  • Off the bike $6.00 per wheel
  • REPLACE RIM TAPE 8.00 PER WHEEL
  • INSTALL TIRE LINER 8.00 PER WHEEL
  • DRILL TO SCHRAEDER 8.00 PER WHEEL
  • Tubular Tire Install $60 per wheel
  • Tubular CX Tire with Aquaseal $75 per wheel

BRAKES

MTB BRAKE LEVER INSTALL 15.00 PER LEVER

  • Includes lubrication/replacement of brake cable & housing (parts not included)

ROAD BIKE BRAKE LEVER INSTALL 15.00 PER LEVER

  • Includes lubrication/replacement of road brake cable/housing. Requires replacement of handlebar tape (parts not included)

STI/ERGO LEVER INSTALL 25.00 PER LEVER

  • Requires replacement of handlebar tape, cables and housing

REPLACE SHOES 15.00 PER SET

  • Includes machining of rim brake track and filing of brake shoes to remove glazing

ADJUST SHOES 10.00 PER SET

  • Includes machining of rim brake track and filing of brake shoes

REPLACE CABLE/HOUSING 15.00 EACH PART

INSTALL BRAKE 20.00

  • Includes lubrication/replacement of brake cable/housing (parts not included)

REBUILD BRAKE 25.00

DISC BRAKES

INSTALL MECHANICAL DISC 25.00 PER BRAKE

  • Includes lubrication/replacement of brake cable/housing (parts not included)

INSTALL HYDRAULIC DISC BRAKE 30.00 PER BRAKE BRAKE BLEED 25.00 PER BRAKE

  • Additional $5.00 charge for brake fluid (Dot 4 or Mineral Oil)

STRAIGHTEN ROTOR 15.00 PER BRAKE

DERAILLEUR

FULL ADJUSTMENT 15.00 PER DER.

  • Includes adjustment, lubrication/replacement of cable/housing (parts not included)

INSTALL SHIFTERS 25 PER SHIFTER

  • Requires replacement of cables/housing (parts not included)

REPLACE PULLEY WHEEL 10.00 PER WHEEL

DERAILLEUR INSTALL 25.00 PER DER.

  • E-Bracket Front Derailleurs require additional charge for crankset/bottom bracket removal

E-CLAMP FRONT DERAILLEUR INSTALL 35.00

STRAIGHTEN DROP OUT/HANGER 12.00

HELICOIL REAR DROPOUT 25.00

REPLACE DERAILLEUR HANGER 20.00

REPLACE REAR DER. PIVOT BOLT 25.00

OVERHAUL REAR DERAILLEUR 35.00

CRANKSET

INSTALL CRANK( INCLUDES ADJUSTING FRONT DER) 25.00

BOTTOM BRACKET REPACK (OLD STYLE) 25.00

REPLACE BB 20.00 REPLACE CHAIN RING 20.00

REPLACE ARM (LEFT) 15.00

CHASE BB SHELL 20.00

CHAIN INSTALL 10.00

OIL CHAIN (Free with Lube Purchase) 3.00

SEAT

REPLACE 5.00

ADJUST 5.00

REMOVE STUCK SEAT POST 60.00/HR

PEDALS

REPLACE 5.00

OVERHAUL 15.00

CLEAT ADJUSTMENT/INSTALL 20.00

SUSPENSION FORKS

OIL CHANGE (PLUS OIL) 60.00

FORK SEAL REPLACEMENT(PLUS OIL) 65.00 TO 125.00

VECTOR FORK REBUILD 60.00

REPLACE VECTOR MCU’S 45.00

CANNONDALE HEADSHOCK REPAIR 60.00/HR

INSTALL FORK (NOT PURCHASED AT HBH) 45.00

DISC BRAKE ATTACHMENT 25.00

COMPUTER MOUNT 20.00

REAR SUSPENSION

REPLACE BODY SPACERS AND BUSHINGS 15.00

SUSPENSION OVERHAUL 65.00

TROUBLE SHOOT CREAK IN SUSPENSION 60.00/HR

OVERHAUL SHOCK AIR SLEEVE 35.00

HEADSET

REPLACE HEADSET 25.00

OVERHAUL HEADSET 20.00

FACE STEERER TUBE 45.00

HUBS

OVERHAUL FRONT 15.00

OVERHAUL REAR 25.00

REPLACE FREEHUB BODY 25.00

CHRIS KING OVERHAUL 45.00

WHEELS

MCW WILL NOT REBUILD WHEEL WITH USED SPOKES

BUILD WITH MCW-SUPPLIED PARTS  35.00/WHEEL

BUILD WITH CUSTOMER SUPPLIED RIM OR HUB  75.00/WHEEL

BUILD WITH CUSTOMER SUPPLIED RIM AND HUB  100.00/WHEEL

INSTALL NEW FRONT WHEEL 10.00

INSTALL NEW REAR WHEEL 15.00

WHEEL TRUE FRONT 10.00 TO 20.00

WHEEL TRUE REAR 10.00 TO 20.00

REMOVE COG SET 5.00

REMOVE BRAKE ROTOR 10.00

REMOVE TIRE 8.00

DISH WHEEL AND TRUE 20.00

REMOVE HOPS AND OR FLAT SPOTS (EA.) 8.00

DRILL TO SCHRAEDER 8.00

TRUE ROTOR 15.00

ADDITIONAL INSTALLATIONS

INSTALL TRAINING WHEELS 15.00

FENDERS 25.00

COMPUTER (FRONT MOUNT) 25.00

RACK 25.00

HANDLEBAR INSTALL (DOES NOT INCLUDE SHORTENING OR LENGTHENING OF HOUSINGS) 30.00

STALL GRIPS 5.00

TAPE HANDLEBARS 15.00

SHORTEN HANDLEBAR LENGTH 15.00

INSTALL CLIP ON AERO BARS 20.00

INSTALL BAR ENDS 10.00

DISASSEMBLY FOR PAINTING 50.00

RE-ASSEMBLY 160.00

FRAME SWITCHOUT 120.00

BOX BICYCLE 35.00

ASSEMBLE BOXED BIKE (PREVIOUSLY ASSEMBLED AND ADJUSTED) 45.00

ASSEMBLE BOXED BIKE (NOT PREVIOUSLY ASSEMBLED) 120.00

ASSEMBLE BIKE FROM BARE FRAME 200.00